11
Tuner configuration
Modulation
DVB-T, DVB-T2, DVB-C
Input frequcy in kHz
42.000 ... 1.002.000
Band with
1
in MHz
DVB-T: 6, 7, 8 MHz
DVB-T2: 1.5, 5, 6, 7, 8 MHz
Stream
2
HP, LP
PLP ID
3
input range 0 .... 255
PLP ID auto
3
automatic determination of the PLP-ID by the DVB-T2 modulator
Symbol rate
4
in kSps
aymbol rate of the transponders
Constellation
4
auto, 16, 32, 64, 128, 256 QAM
Input
selection of the input port: IN, IN/ OUT
Only for the modulation required setting boxes are activated. All other fields are grayed out and disabled.
By pressing the „
Send
“ button, the settings are saved and displayed. In the right part of the field the program list of the
transponder appears.
1
The input of the bandwidth is only required for DVB-T and DVB-T2 modulation.
2
The stream selection is only available if DVB-T modulation is present. If the DVB-T transport stream has been transmitted
with hierarchical modulation it can be determined by the selection field, whether the transport stream is to be received
with a high priority (HP), or with a low priority (LP). For non-hierarchical transport streams that selection is disabled.
3
The selection fields “PLP-ID“ and “PLP-ID Auto“ are only available for DVB-T2 modulation. The PLP concept (physical
layer pipes) implies that within a channel multiple services can transmit with a specially adjustable robustness. Is the
“PLP-ID Auto“ selected, the demodulator automatically selects a PLP. A possible entry in the “PLP-ID“ is ignored in this
case. If the box is not checked, the ID can be specified targeted in the field “PLP-ID“.
4
Entering the symbol rate and the constellation is required for DVB-C modulation only.
