BLADEZ SX4i, Owner'S Manual

Page: 19 / 31

19
STEP 11
FITTING THE MONITOR
SUPPORT
Plug connector (101), coming out
of the main post, into connector,
coming out of the monitor
support, Fig.10. Now use the
screws (99) to attach them to the
post.
STEP 12
CONNECTING THE MONITOR
Remove screws (105), Fig.11, on the back of the
monitor (1). Then mate the connector (101)
and the handgrip connectors (9), Fig.11. Next,
slide the front of the monitor onto the plate on
top of the main post (102) in the direction of
the arrow, Fig.11, push the cables down into
the main post making sure not to pinch any of
the cables. Replace the screws (105) removed
previously. Fit the monitor support side covers
(5L & 5R) and secure using screws (6 & 7),
Fig.12.
Fig. 10
Fig. 11
Fig. 12