BLADEZ R300II, Owner'S Manual

Page: 17 / 74

17
STEP 3
Use the Allen Wrench (66) to unscrew the 4 Screws (9) 4 Spring Washers 8mm (8) and
4 Arc Washers (7) from the Handlebar Post (5). Set the screws and washers aside for
assembly later in this step.
Slide the Post Cover (10) onto the Handlebar Post (5) and connect the Mid Sensor Wire
1 (4) at the bottom of the Handlebar Post (5) with the Mide Sensor Wire (12) coming
out of the Main Frame (13). Connect the Trunk Line 2 (3) to Trunk Line 1 (22).
Slide the Handlebar Post (5) onto the Main Frame (13) and secure with 4 Screws (9) 4
Spring Washers (8) and 4 Arc Washers (7). Tighten with Allen Wrench (66).
#4
#4
#4