BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
• Phone 949-206-8152 • Fax 949-206-0013
16
OPERATION CONTINUED
level. After several seconds, the ENERGY window will switch back to the Kcal
number display. The adjustment of WATT level is circular.
(6) If you want to change the LEVEL under RUN mode, press SELECT key to
enter the LEVEL edit mode. Select the LEVEL by pr or – and then
press ENTER to confirm.
P-2: Operation method is the same as P-1.
P-3: Operation method is the same as P-1.
P-4: Operation method is the same as P-1.
P-5: Operation method is the same as P-1.
P-6: Operation method is the same as P-1.
HRC (heart rate control mode): See the next page for more information on your
target heart rate.
(1) The meaning of HRC:
(2) You can adjust the Max Heart Rate according to Age and the intensity of
exercise before using this function. When you enter RUN mode, the unit
will compare the user’s current heart rate with the max value and then
adjust the WATT level to keep the user’s heart rate below the max value.
The WATT level will be automatically adjusted from 0 to 400. Under HRC
mode, the user cannot adjust the WATT level manually.
(3) The edit content includes Age, Max Heart Rate, Count Up and Count Down
Time, etc.
(4) When the matrix window displays HRC, press ENTER to edit the detailed
item. It will display Age, Max Heart Rate and Time for editing in sequence.
Press + or – to select the desired value.
(5) Range of Age is 13~80. According to the age, there will be different
suggested values, upper and lower limit for the Max Heart Rate. You can
adjust the value based on the level of exercise desired.
(6) When the time is set at 0:00, the time will count up from 0 and it can reach
99min; when the setting is countdown, then the minimum set value is 5min,
the maximum set value is 99min.
