BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
• Phone 949-206-8152 • Fax 949-206-0013
7
SECTION 3
GETTING STARTED
FOLDING:
To fold your treadmill into the upright position, first be sure to set the elevation to 0%
elevation. The treadmill will not lock into the upright position if the treadmill is not at
0 % elevation.
Using both hands, lift the treadmill by the end caps and push it up until the retaining shaft
locks the treadmill into place.
UNFOLDING:
To unfold the treadmill from the upright position simply depress the unfolding pedal with
your right foot and guide the deck down with both hands. The unfolding pedal may be
located as shown or near the side. Make sure that you do not let go until the deck is
firmly on the floor.
MOVING THE TREADMILL
The treadmill will need to be locked in the upright position as illustrated above. Grab the
end caps with two hands and slowly pull the deck down towards your body until the
casters are able to roll freely. Keep the treadmill at that angle until you are done with your
move. Always be sure to use correct lifting form / technique.
End Caps
Unfolding Pedal
Casters
Retaining Shaft
