background image

 

 

BladeZ Corporation  •  20155 Ellipse  •  Foothill Ranch  •  CA  •  92610 

www.ebladez.com

  •  Phone 949-206-8152  •  Fax 949-206-0013 

3

 

SECTION 1 

 

IMPORTANT SAFETY INSTRUCTIONS 

Read all instructions before using the treadmill. 

Notice: Before using this or any other exercise equipment consult your family physician 

or health care professional to develop a well planned exercise program to fit your 

health needs. If you encounter any pain or breathing discomfort while working out, 

STOP!, 

and consult a physician before continuing 

 

WARNING!

 

 

1.

 

It is wise to always unplug this appliance from the electrical outlet immediately 
after use. 

2.

 

Keep Children away from machine while in use. 

3.

 

Do not wear loose or dangling clothing while using the treadmill 

4.

 

Keep a minimum clearance of 18” on each side and 24” at the rear of the treadmill 

for safety.  

5.

 

It is mandatory that you unplug the treadmill prior to cleaning to reduce the risk 

of electric shock, serious burns, and the risk of injuries. 

6.

 

The treadmill should never be left unattended when in operation. Unplug the 

treadmill from the outlet when not in use or when servicing the treadmill. 

7.

 

Close supervision is necessary when this appliance is used by or near children, 
invalids, disabled persons, or those with diminished capacity. 

8.

 

Use this appliance only for its intended use as described in this manual. 
Do not use any attachment not recommended by the manufacturer. 

9.

 

Never operate this appliance if it has a damaged cord or plug, or if it is not 
working properly. Call your service center for any service concerns before taking 

your treadmill in for repair. 

10.

 

Keep the cord away from heated surfaces. 

11.

 

Never drop or insert any object into any opening. 

12.

 

Do not use outdoors. 

13.

 

Do not operate where aerosol (spray) products are being used or where oxygen is 

being administered. 

14.

 

To disconnect, turn all controls to the off position, then remove plug from outlet. 

15.

 

Connect this appliance to a properly grounded outlet only. 

16.

 

This appliance is intended for household use only. 

SAVE THESE INSTRUCTIONS 

Summary of Contents for BLADEZ T2 BASIC - PARTS























Reviews: