14
BLACKVUE
I
Use the pry tool to lift the edges of the windshield trim/molding and
tuck in the power cord.
Power cord
Rear camera connection cable
J
Turn on the engine. The BlackVue dashcam will power up and start
recording. Video files are stored on the microSD card. When the
microSD card fills up, the newest video files will start to replace the
oldest video files (called
loop recording
) – so you will always have
the most recent video files.
Note
y
There are 3 recording modes: Normal, Event and Parking. The
dashcam starts recording in normal mode, switches to event mode
when an impact is detected, and switches to parking mode if the
vehicle is stationary for 5 minutes.
y
When you run the dashcam for the first time the firmware is
automatically loaded onto the microSD card. After the firmware has
been loaded onto the microSD card you can customize settings using
BlackVue Viewer on a computer.
