©2022 Blackline Safety Corp
G7 Dock Technical User Manual
|
18
Rev. 11
2022-09-26
If the power light is off, ensure that:
•
Power cable is properly plugged into dock and the power adaptor
•
Power source being used is 120/240 VAC
7.2
CALIBRATION AND BUMP TEST FAQ
Why are my bump tests and calibrations failing?
Calibrations and bump tests can fail if there is not enough gas reaching the sensors. To
ensure that gas is flowing from the gas cylinder to G7 Dock, check that:
•
There are no kinks or crimps in the tubing.
•
The gauge on the gas cylinder indicates there is gas inside (i.e., check that the gas
cylinder is not empty).
•
The gas cylinder is using a demand-flow regulator.
•
The quick-connects are properly connected to G7 Dock.
•
Gas concentrations in the gas cylinder match Dock configurations.
If G7 Dock is still not operating correctly, please contact
8
SPECIFICATIONS AND LEGAL NOTICES
8.1
DETAILED SPECIFICATIONS
Size & Weight
Size: 215mm x 102mm x 95mm (8.46” x 3.94” x 3.74”)
Weight: 202g (7.1oz)
Gas configuration
4 customizable gas inlets, 1 gas outlet
Bump test
25 second bump test, less than 10 seconds of gas applied
during a bump
Calibration
4 minute calibration, less than 2 minutes of gas applied
during a calibration
Gas Usage
Optimized gas delivery (less than 500mL/min)
Power Supply
Blackline requires using the power supply provided with
your G7 Dock.
Input voltage: 5 VDC @ 1000 mA
Power connector: Micro-USB
120/240 VAC power adaptor and USB
cable included.
Regulatory Compliance
RCM
CAN ICES-3(B)/NMB-3(B)
FCC
CE
Features
•
Over-the-air (OTA) configuration updates
•
Automatic bump
•
Automatic calibration
•
Dock usage reports
•
Gas usage reports
Warranty
Two year warranty
