13
|
G7 Dock Technical User Manual
©2022 Blackline Safety Corp
2022-09-26
Rev. 11
3.
Close G7 Dock’s lid and press down firmly until the
release tabs click into place on both sides.
4
FEATURES
4.1
CHARGING G7
G7 devices will automatically start charging when placed into a powered G7 Dock. It will take a
maximum of four hours to fully charge G7.
NOTE:
If G7 is not charging, confirm the following:
•
G7 Dock is powered (the green light is on).
•
The charge clip is clean of debris.
•
The G7 device is properly placed on the dock charge clip.
4.2
BUMP TEST
Bump testing verifies that your device’s gas sensors and notification indicators (lights, sound,
and vibration) are functioning correctly. During a bump test, you apply a known concentration
and amount of gas to confirm the sensors will trigger a notification due to the gas exposure.
Your bump test schedule should be informed by your company’s safety policy and is
configurable by your Blackline Live administrator.
G7 automatically communicates bump test data to the Blackline Safety Network and will
remind you when a bump test is overdue. The bump test schedule is configurable.
NOTE:
To meet CSA LEL performance standard, you are required to bump test before each
day’s use. Blackline recommends you do not exceed 30 days without a bump test.
