17
|
G7 Dock Technical User Manual
©2022 Blackline Safety Corp
2022-09-26
Rev. 11
6
G7 DOCK CARE
6.1
MAINTENANCE
To make sure G7 Dock is in working condition, ensure the following:
•
Gas valves inside the G7 Dock lid move easily and are free of debris.
•
Gas inlets and outlet are free of debris.
•
Charge clip is free of debris.
To clean G7 Dock, disconnect from power and wipe down with a damp cloth. Do not use
pressure spray or cleaning solvents.
For best performance, G7 Dock should be operated in a dry and dust-free environment.
7
TROUBLESHOOTING
7.1
SETUP FAQ
Why is G7 telling me to close the lid when I have already closed it?
If your device is telling you to close the lid when you try to run a bump test or calibration, it is
likely that the lid has not been closed properly. Ensure that you press down firmly on both
sides of the lid so that both release tabs click into place.
Why is my device unresponsive when I put it into G7 Dock?
If your device does not respond when placed into G7 Dock, it may not be properly connected
to the dock, or the dock may not be connected to a power supply. Remove your device from
G7 Dock and check to see if the green power light is on.
If the power light is on, ensure that:
•
Charge clips on both the device and dock are connected.
•
Device clicks into place when set down into the Dock.
•
Lid is properly closed. Ensure that you press down on both sides so that both release
tabs click into place.
•
Charge clips are clean and free of debris.