11
|
G7 Dock Technical User Manual
©2022 Blackline Safety Corp
2022-09-26
Rev. 11
3
OPERATING
3.1
REQUIREMENTS
For G7 Dock to operate, you will need the following:
•
G7c or G7x personal safety monitoring device (single-gas or multi-gas cartridge)
•
Gas cylinder with specific single-gas or multi-gas mixture
•
If calibrating with chlorine (Cl
2)
:
Teflon-lined tube (ACC-FEP-T2)
Stainless steel regulator, or a regulator with a Viton valve seat and seals
(ACC-DFR-V)
•
120/240 VAC power source and power components
NOTE:
You must use the power components provided with your G7 Dock.
3.2
POWERING ON
1.
Insert the power cable into the port on the bottom
of G7 Dock. Feed the power cable through the
tracks along the bottom to allow the dock to lie flat
on a table surface or when mounted on a wall.
When plugged in, the green light at the charge clip
will turn on to indicate power.
