manualshive.com logo in svg

BlackHawk Labs USB560v2, Installation Manual, Page: 15 / 35

Share
Download
BlackHawk Labs USB560v2 Installation Manual Download Page 15

USB560v2-IG-01  

 

XBlackhawk USB560v2 System Trace Emulator 

15 

3 Installation 

3.1 Requirements 

The BH560v2 is only supported by Code Composer Studio v4.2 and later.  You must have this 
version (or later) of software installed in order to use the BH560v2.  It is not compatible with 
earlier versions, such as v3.3. 

NOTE: 

Drivers for the BH560v2 are bundled with the CCStudio software distribution 
(download or DVD) from Texas Instruments.  You don’t need to install a separate 
installer.  CCStudio should be installed first, and before attaching or using the 
BH560v2. 

Software updates are provided by Blackhawk and distributed via the Eclipse Update Manager.  
The eclipse update manager is part of CCS v4.2 and later (CCS v4 is based on the eclipse IDE).  
The update manager will automatically check for updates for Blackhawk emulation drivers as well 
as all other features installed with CCStudio. 

The following are general hardware guidelines for a computer that will support using the 
BH560v2 emulator.  It is recommended that you refer to the system requirements and 
recommendations specified by Code Composer Studio for more details. 

•

 

1.2 GHz or faster Pentium or compatible 

•

 

10 GB of free hard disk space 

•

 

2 GB of RAM 

•

 

SVGA (1024x768) color display 

•

 

Local DVD-ROM drive 

•

 

Microsoft Windows XP/Vista/7 (32 or 64-bit editions) 

•

 

Available USB port 

NOTE 

Before attaching the BH560v2 hardware to your computer, install CCStudio v4.2 (or 
later) FIRST! 

Summary of Contents for USB560v2




































Reviews:

No comments