Blackbox KV7118SA, User Manual, Page: 48 / 72

47
CHAPTER 4: Operation and Configuration
4.2.8 C
HANGING THE
M
ENU
A
TTRIBUTES
The menus and windows displayed on the monitor can be altered in visual
appearance to suit the particular use of the system (and on a 4x8 Switch, you can
do so independently for each console). Certain adjustments can be made to the
menus so that:
• The menu is positioned in a convenient location on the display.
• The computers are listed by port or by name, whichever is desired, in the
appropriate menus.
• The character height is suitable for display.
• The colors are suitable.
• The
SERVSWITCH ELITE
window appears on the display for a certain
period of time.
To change attributes of the on-screen menus, take these steps:
NOTE
It is possible, when you change the menu attributes, to distort the
appearance of the menus/windows so that they are hard or impossible
to read, which obviously makes it difficult to correct the problem. If this
occurs, you can reset the ServSwitch Elite to its factory-default values
for all options accessible through the on-screen display by pressing and
releasing [Esc] (escape) twice, then [Print Screen], then [F10], then the
letter [Y], then [Enter].
1. Press [Print Screen]. The
SERVSWITCH ELITE
window appears on the
display.
2. Press [F2] and the
FUNCTIONS
window appears. The Commands menu will
be displayed. Press the right arrow ([
→
]) key to move the highlight bar so
that the Setup menu is displayed.
3. Using the up- and down-arrow ([
↑
] and [
↓
]) keys, move the highlight bar to
ATTRIBUTES
.