Blackbox KV7118SA, User Manual, Page: 45 / 72

44
SERVSWITCH ELITE™
5. Press the [Tab] or right-arrow ([
→
]) key to move the highlight bar to the
SEC
column and use the keyboard keys to enter a time value in seconds (up
to 255) that you want this computer to be connected to the console (viewable
on the monitor) before the Switch switches to the next computer in the scan.
To delete a single port from the list, enter “0” (zero) seconds here. To
delete a whole set of unwanted ports at the end of the scan list, which is where
most of them end up after you’ve brought together your list of desired ports
anyway, place the highlight bar on the topmost port to be removed and press
the [Delete] key (not the [Del] key on the numeric keypad). The highlighted
port and all ports below it will be removed from the list.
6. Press the down-arrow ([
↓
]) key to move the highlight bar to the next line.
7. Repeat steps 5 through 7 as necessary for your remaining computers.
8. When you’ve finished setting the scan pattern, press [Enter]. The new scan
pattern supersedes the standard scan or any previous custom scan. You can
press [Esc] (escape) at any time prior to pressing [Enter] to retain the
previous scan pattern. Pressing the [F2] key will return all
PORT
and
SEC
values to their factory defaults.
To exit the on-screen menus in order to test your new scan pattern, press [Esc].