52
www.digiop.com
SECTION 8: UMS SINGLE CLIENT SOFTWARE
After entering all fields in the
Event Search
menu, click
OK
to save your entries and exit the Setup menus.
8.4.5 Record Setup
To open the Record menu, click the
Record
entry in the left frame of the
Setup
window. The Record menu allows you to configure
the conditions that trigger live video recording.
In the Record menu, set the following:
•
Record Condition
: Select
Always
or
Event
, then
Auto record
.
•
Event
: If Event was selected as the Record Condition, select the type of event and the duration of the recording.
•
Channels
: Select the channels to be recorded during the conditions selected above. |
After entering all fields in the
Record
menu, click
OK
to save your entries and exit the Setup menus.
8.4.6 Record Disk Setup
To open the Record Disk menu, click the
Disk
entry in the left frame of the
Setup
window. The Disk menu allows you to select the
location where recorded data is saved, and the amount of space on the disk to allocate for recordings.