Black BLK-DH200400D User Manual Download Page 101

Page: 101 / 105

H.264 DVR User Manual

APPENDIX A: HDD REPLACEMENT

HDD

HDD Power/Data

Cable Connector

Remove the 4 bracket mounting screws, two on the front side and two on the back side of the HDD.

Bracket Mounting Screws

HDD Mounting Screw

Carefully lift the HDD and bracket assembly out of the chassis and lay it on a clean, level surface.

Remove the brackets from the HDD by removing the four HDD mounting screws.

Attach the brackets to the new HDD using the four HDD mounting screws removed in the previous step.

Set the HDD and bracket assembly into the HDD enclosure in the same position and orientation as the one removed.

10. Reattach the brackets to the DVR chassis using the four bracket mounting screws removed earlier.

11. Reconnect the HDD power/data cable connector to the HDD.

12. Reinstall the HDD chassis cover.

Summary of Contents for BLK-DH200400D










































































































Search results

Summary of Contents for BLK-DH200400D

Reviews:

Related manuals for BLK-DH200400D

Brands by name

Popular brands

Black BLK-DH200400D, User Manual

Search results

Summary of Contents for BLK-DH200400D

Reviews:

Related manuals for BLK-DH200400D

Brands by name

Popular brands