www.blackmountain.bike
SETTING UP: PUTTING ON THE PEDALS
Make sure that you have the correct pedal for
each side of the bike. On the end of each pedal
axle you will find either a letter R (right) or a
letter L (left).
The right-hand side pedal (as you sit facing
forwards on the bike) tightens as normal (i.e.
clockwise) but the
left-hand pedal has a reverse
thread on it, meaning that you need to turn it
anti–clockwise to tighten
. Be careful not to
cross–thread when first engaging with the thread
in the crank.
Once you have threaded them on fully by hand,
finally tighten them up to 25Nm (18.4ft-lb)
torque with the supplied 15mm spanner.
Check the pedals are on tight on both sides
before allowing your child to ride.
01
02
04
03
TO DO THIS YOU WILL NEED THE 15MM SPANNER
L = LEFT PEDAL
R= RIGHT PEDAL
LEFT
PEDAL
RIGHT
PEDAL
25
Kapel_Hutto_Manual OCT2019ALv3.indd 25
28/11/2019 14:13
