© Black Mountain Bikes
CHANGING MODES: ONE TO TWO - UP:RISE
REMOVE THE STEM FACE PLATE
Using a 5mm allen key undo the four face-plate
bolts on the front of the stem and remove the
face (front) plate. Let the bars hang gently by the
cables.
ATTACH THE UP:RISE STEM EXTENDER
Mate the stem extender to the original stem
body with the extender 'pointing upwards'
so that the stem extender raises the height
of the handlebar. Insert the four new bolts
included with the stem extender through the
stem extender into the original stem body. It
is important to thread all four bolts in loosely
before you tighten them. Once all the bolts are
in place tighten all four to 7Nm (5.2ft-lb).
REPLACE THE HANDLEBAR
Reinsert the handlebars, making sure that they are
the correct way around and the brake and gear
cables are not twisted.
02
01
03
34
Kapel_Hutto_Manual OCT2019ALv3.indd 34
28/11/2019 14:13
