iii
Fig. 6
A - Stop switch (interruptor de apagado)
B - Trigger lock out (gatillo con seguro)
C - Throttle trigger (gatillo del acelerador)
D - Starter grip and rope (mango del arrancador
y cuerda)
E - Primer bulb (bomba de cebado)
Fig. 4
A - Grass deflector (deflector de pasto)
B - Slot (ranura)
C - Tab (orejeta)
D - Bolt (perno)
A
B
C
D
Fig. 5
A - Oil cap/dipstick (tapa de relleno de aceite/
varilla medidora de aceite)
B - Hatched area (área cubierta con rayas
entrecruzadas)
C - Oil fill hole (agujero de llenado de aceite)
D - Funnel cap (tapa de embudo)
A
B
C
D
B
C
E
FULL
CHOKE
RUN
HALF
CHOKE
1. PRESS PRIMER BULB 10X
2. SET TO
3. PULL UNTIL UNIT ATTEMPTS
TO START (MAX 4X)
(DO NOT PULL THROTTLE TRIGGER)
4. SET TO
5. PULL UNTIL UNIT STARTS
6. WAIT 10 SECONDS
7. SET TO
FULL CHOKE
HALF CHOKE
RUN
FULL
CHOKE
RUN
HALF
CHOKE
1. PRESS PRIMER BULB 10X
2. SET TO
3. PULL UNTIL UNIT ATTEMPTS
TO START (MAX 4X)
(DO NOT PULL THROTTLE TRIGGER)
4. SET TO
5. PULL UNTIL UNIT STARTS
6. WAIT 10 SECONDS
7. SET TO
FULL CHOKE
HALF CHOKE
RUN
FULL
CHOKE
RUN
HALF
CHOKE
1. PRESS PRIMER BULB 10X
2. SET TO
3. PULL UNTIL UNIT ATTEMPTS
TO START (MAX 4X)
(DO NOT PULL THROTTLE TRIGGER)
4. SET TO
5. PULL UNTIL UNIT STARTS
6. WAIT 10 SECONDS
7. SET TO
FULL CHOKE
HALF CHOKE
RUN
FULL
CHOKE
RUN
HALF
CHOKE
1. PRESS PRIMER BULB 10X
2. SET TO
3. PULL UNTIL UNIT ATTEMPTS
TO START (MAX 4X)
(DO NOT PULL THROTTLE TRIGGER)
4. SET TO
5. PULL UNTIL UNIT STARTS
6. WAIT 10 SECONDS
7. SET TO
FULL CHOKE
HALF CHOKE
RUN
FULL
CHOKE
RUN
HALF
CHOKE
1. PRESS PRIMER BULB 10X
2. SET TO
3. PULL UNTIL UNIT ATTEMPTS
TO START (MAX 4X)
(DO NOT PULL THROTTLE TRIGGER)
4. SET TO
5. PULL UNTIL UNIT STARTS
6. WAIT 10 SECONDS
7. SET TO
FULL CHOKE
HALF CHOKE
RUN
Fig. 7
A - Full choke position (posición de anegación
máxima)
B - Half choke position (posición de anegación
media)
C - Run position (posición de marcha)
D - Choke lever (palanca del anegador)
A
B
C
D
D
D
Fig. 8
PROPER OPERATING POSITION
POSICIÓN CORRECTA PARA EL MANEJO
DE LA HERRAMIENTA
A
D
Fig. 9
A - Straight shaft trimmer (recortadora de eje
recto)
B - Dangerous cutting area (área peligrosa de
corte)
C - Direction of rotation (sentido de rotación)
D - Best cutting area (mejor área de corte)
B
C
D
A
Fig. 10
A - Trimmer cut-off blade (cuchilla de corte de
hilo de la recortadora)
A
A - Eyelet (ojillo)
B - Arrows (flechas)
C - Pull strings (tira del hilo)
D - Rotate the bump knob (gire a la derecha el
perilla percusiva)
Fig. 11
B
A
D
C
