18
TRAVEL AIR-
Item code:BH06-A.
Instruction Manual
RUDDER SERVO INSTALLATION.
Rudder servo install as same as method of
elevator servo. See picture below:
Rudder servo.
Rudder servo.
VERTICAL INSTALLATION.
See picture below:
Hinge.
Control clasp.
Cut the covering
away from the slot.
Temporary pin to
keep hinge centered.
Assemble then apply drops of thin
C/A to center of hinge,on both sides.
1
1) Locate the two nylon control horns, two
nylon control horn backplates and four M2 x
12mm machine screws.
1
2) Position the rudder horn on the bottom
side of rudder.
RUDDER CONTROL HORN
AND PUSHROD INSTALLATION.
2 x 12mm.
