13
TRAVEL AIR-
Item code:BH06-A.
Instruction Manual
Install the spinner backplate, propeller and
spinner cone. The spinner cone is held in
place using two 3mm x 12mm wood screws.
1
1. Install the rubber grommets and brass
collets into the elevator servo. Test fit the servo
into the servo tray.
1
2. Mount the servo to the tray using the
mounting screws provided with your radio sys-
tem.
INSTALLING THE SPINNER.
3x12mm
Secure.
SERVO INSTALLATION.
ELEVATOR INSTALLATION.
elevator servo.
HORIZONTAL STABILIZER INSTALLATION.
See pictures below:
Bottom side
elevator servo.
