15
TRAVEL AIR-
Item code:BH06-A.
Instruction Manual
Top side
Center line.
Remove
covering.
Mark pen
1
4. Remove the stabilizer. Using the lines
you just drew as a guide, carefully remove the
covering from between them using a modeling
knife.
When cutting through the covering to
remove it, cut with only enough pressure
to only cut through the covering it’s self.
Cutting into the balsa structure may
weaken it. This could lead to possible fail-
ure during flight
Remove
covering.
1
3. Mark the shape of the vertical on the left
and right sides onto the horizontal stabilizer
using a felt-tip pen
Top side
Bottom side.
