19
TRAVEL AIR-
Item code:BH06-A.
Instruction Manual
1
3) Using a 1.5mm drill bit and the control
horns as a guide, drill the mounting holes
through the rudder halves.
Secure.
Drill a hole
1.5mm.
o
4) Using a modeling knife, remove the cov-
ering from the top of the fuselage and the cov-
ering from over the precut hinge slot cut into
the lower rear portion of the fuselage This slot
accepts the lower vertical.
Rudder
control horn.
Remove covering.
Hinge slot.
1
5. Slide the rudder into the fuselage as
same as picture below.
