INSTRUCTION MANUAL.
17
8) After the epoxy has fully cured, re-
move
the masking tape or T-pins used to hold the
stabilizer in place and carefully inspect the
glue joints. Use more epoxy to fill in any
gaps that were not filled previously and
clean up the excess using a paper towel and
rubbing alcohol.
3mm x 40mm.
Nilon
control clasp.
M3 lock nut
.
Drill 1 hole with 6 mm diameter.
Control horn of elevator.
Control horn of elevator.
Elevator control horn install as same as the
way of aileron control horn. Please see pic-
tures below.
C/A glue.
ELEVATOR CONTROL HORN INSTALLA-
TION.
