THUNDERBIRDS Item code: BH144-A
.
Instruction Manual
10
VIII. INSTALLING NOSE GEAR
See picture below:
See picture below:
INSTALLING SERVO NOSE GEAR
wire cable.
wire cable.
X. INSTALLING THE RECEIVER,
ESC
AND BATTERY
1
1)
Plug the servo leads and the switch lead
into the receiver. You may want to plug an aileron
extension into the receiver to make plugging in the
aileron servo lead easier when you are installing
the wing. Plug the battery pack lead into the switch.
wire cable.
Servo nose gear
Drill a hole 2.5mm
and Secure
3x15mm
Trim
Drill a hole 2.5mm
and
secure
3x12mm
1. Push in
2. Secure
3x4mm
