20
GLASAIR -
Item code: BH74
.
Instruction Manual
1
1. Set the tail wheel assembly in place
on the plywood plate. The pivot point of the
tail wheel wire should be even with the rud-
der hinge line and the tail wheel bracket
should be centered on the plywood plate.
Rudder push- pull cable.
MOUNTING THE TAIL WHEEL
BRACKET.
1
1. Rudder push - pull system install as
same as picture below.
RUDDER CABLE INSTALLATION.
Assemble then apply drops of thin
C/A to center of hinge,on both sides.
Rudder cable.
Rudder push-pull system install as sams as
picture below.
M3 clevis ( 4pcs for push - pull system ).
M3 lock nut.
2 x 10mm
3x15mm
R u d d e r
pushrod
