14
GLASAIR -
Item code: BH74
.
Instruction Manual
1
2. Mount the servo to the tray using the
mounting screws provided with your radio sys-
tem.
1
1. Install the rubber grommets and brass
collets into the elevator servo. Test fit the servo
into the servo tray.
Throttle
pushrod
Secure
Throttle servo
1
Install one adjustable metal connector
through the third hole out from the center of
one servo arm, enlarge the hole in the servo
arm using a 2mm drill bit to accommodate the
servo connector. Remove the excess mate-
rial from the arm.
After installing the adjustable metal con-
nector apply a small drop of thin C/A to
the bottom nut. This will prevent the con-
nector from loosening during flight.
INSTALLING THE THROTTLE PUSHROD.
Cut
ELEVATOR INSTALLATION.
SERVO INSTALLATION.
Throttle servo
elevator servo
Elevator servo
