15
GLASAIR -
Item code: BH74
.
Instruction Manual
Cut the covering
away from the slot.
Temporary pin to
keep hinge centered.
Assemble then apply drops of thin
C/A to center of hinge,on both sides.
1
1. Draw a center line onto the horizontal
stabilizer. Then put the horizontal into the fuse
large.
1
2 Using a modeling knife, cut away the cov-
ering from the fuselage for the stabilizer and
remove it.
1
3. Mark the shape of the vertical on the left
and right sides onto the horizontal stabilizer
using a felt-tip pen
Elevator
control horn.
A+B Epoxy
PLUS glue
Drill a hole 1.2mm
diameter
1
Horizontal stabilize installation .
See picture below.
HORIZONTAL STABILIZER INSTALLATION.
Elevator control horn install as same as the
way of aileron control horn. Please see pic-
tures below.
ELEVATOR CONTROL HORN INSTALLA-
TION.
Bottom side.
