CORSAIR -
ITEM CODE: BH64
INSTRUCTION MANUAL
5
2) Using a modeling knife, remove the cov-
ering at possition show below.
Remove covering.
4) Drill 1,6mm pilot holes through the block
of wood for each of the four mounting screws
provided with the servo.
3) Using the thread as a guide and using
masking tape, tape the servo lead to the end
of the thread: carefully pull the thread out.
When you have pulled the servo lead out, re-
move the masking tape and the servo lead
from the thread.
5. Instal servo tray with aileron servo into
the wing as same as picture below.
Secure
Electric wire
Thread
2x10mm.
Secure
Downloaded from
www.Manualslib.com
manuals search engine
