CORSAIR -
ITEM CODE: BH64
INSTRUCTION MANUAL
21
6. After the epoxy has fully cured, remov
the masking tape or T-pins used to hold the
stabilizer in place and carefully inspect the
glue joints. Use more epoxy to fill in any
gaps that were not filled previously and
clean up the excess using a paper towel and
rubbing alcohol.
Epoxy glue
C/A glue
C/A glue
Elevator control horn install as same as the
way of aileron control horn. Please see pic-
tures below.
3 x 40mm.
Nilon control clasp.
M3 lock nut.
ELEVATOR CONTROL HORN
INSTALLATION.
Remove covering
Downloaded from
www.Manualslib.com
manuals search engine
