CORSAIR
-
ITEM CODE: BH64.
Instruction Manual
24
3. Now, remove the rudder and using a
modeling knife, carefully cut just inside the
marked lines and remove the film of the rud-
der. Just as you did with the horizontal stabi-
lizer, make sure you only press hard enough
to cut the film, not the balsa rudder.
Also carefully remove the covering from
the horizontal fin as below the lines which
you drew as same picture below.
Remove covering
5. Put the vertical stabilizer back in
place. Using a triangle, check to ensure
that the vertical stabilizer is aligned 90 de-
gree to the horizontal stabilizer.
90º
Vertical
Stabilizer.
Horizontal
Stabilizer.
Remove covering
Remove covering
Epoxy glue.
Epoxy glue.
Epoxy glue.
C/A glue
C/A glue
Downloaded from
www.Manualslib.com
manuals search engine
