CORSAIR
-
ITEM CODE: BH64.
Instruction Manual
14
Drill a hole 3mm
diameter
Top left side
Secure
Top side
Bottom side
See pictures below:
INSTALLING THE ENGINE MOUNT.
Drill a hole
2mm diameter
INSTALLING THE STOPPER ASSEMBLY
1) The stopper has been pre-assembled
at the factory.
2) Using a modeling knife, cut one length
of silicon fuel line (the length of silicon fuel line
is calculated by how the weighted clunk should
rest about 8mm away from the rear of the tank
and move freely inside the tank). Connect one
FUEL TANK.
Downloaded from
www.Manualslib.com
manuals search engine
