Black Diamond Equipment vario chest harness, Manual

Page: 2 / 46

VARIO SPEED HARNESS
Before using your harness:
♦
Read the above warnings.
♦
Learn how to put your harness on
correctly.
♦
Learn how to tie the climbing rope to
your harness correctly.
♦ Test the fit by carefully hanging in your
harness.
♦
The Vario Speed harness is a Type C sit
harness according to the CEN standard
EN 12277.
PUTTING ON THE VARIO SPEED
HARNESS
1.
Holding the harness with the tie in
point (a) directly in front of you, step
through the waistbelt (b) and into the leg
loops (c) and pull them up (figure 2).
2. Tighten the waist buckle (d) until the
ENGLISH
Figure 1
Figure 2
For rock climbing and mountaineering only. Climbing and mountaineering are
dangerous. Understand and accept the risks involved before participating.
You are
responsible for your own actions and decisions. Before using this product, read and
understand all instructions and warnings that accompany it and familiarize yourself
with its capabilities and limitations. We recommend that every climber seek qualified
instruction in the use of this gear.*
Failure to read and follow these warnings can
result in severe injury or death!
* A list of guides, guide services and instructional programs may be obtained through local
or national mountain guide associations. In the USA, contact the American Mountain
Guide Association, (303) 271-0984 or www.amga.com.
WARNING
I N S T R U C T I O N S F O R U S E