Black+Decker FX775, Original Instructions Manual

Page: 6 / 20

6
ENGLISH (Original instructions)
Blender assembly
• Make sure the blender blade (19) and transmission
head are fixed tightly to the base of blender jar (18).
• Put required food into the jar (18).
• Install blender measuring cup (16) and blender jar cover
(17) properly.
• Put blender jar (18) onto the motor base (1) vertically,
and then rotate the jar clockwise to lock it into place.
Grinder assembly
• Put the motor base on a flat and dry surface.
• Turn anticlockwise to remove the grinder base (21) from
the grinder cup (23), put required coffee beans into the
cup, then replace the the grinder base and turn
clockwise to secure them firmly.
• Put the complete grinder assembly onto motor base (1),
turn clockwise to secure firmly.
• Make sure that the switch is in “0” position, plug in the
motor base and use pulse 'P' 1 - 2 times for
pre-grinding, then choose '1' or '2' speed for finished
grinding.
Cookery tips
• Refrigerated ingredients, such as butter and eggs,
should be at room temperature before processing
begins. Set these ingredients out ahead of time.
• To eliminate the possibility of egg shells in your recipe,
break eggs into separate container first, then add to the
mixture.
• Be careful that you only mix/blend mixtures as
recommended in your recipe. Fold dry ingredients until
they are just combined using the low speed setting.
• Climatic conditions. Seasonal temperature changes,
temperature of ingredients and their texture variation all
play a part in the required mixing time and the results
achieved.
• Always start processing at lower speed. Gradually
increase to the recommended speed as stated in the
recipe.
Cleaning and maintenance
Warning!
Before performing any maintenance:
• Switch off and disconnect from the mains supply.
• Wait for the appliance to completely cool down.
• If necessary scrape excess food particles from the tools.
Warning! The motor base must not be immersed in water or
other liquid.
• Wipe over the outside surface of the base with a damp
cloth and polish with a soft dry cloth.
• Wipe any excess food particles from the power cord.
• Immerse the processing bowl, bowl cover, pusher, blade
holder, cutting blades, chopper, kneading blade,
emulsifying disc, citrus juicing head and plate and
blender assembly in warm soapy water for complete
cleaning. Then rinse under running water and wipe dry.
Mains plug replacement
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the new
plug.
• Connect the blue lead to the neutral terminal.
• If the product is class I (earthed), connect the
green/yellow lead to the earth terminal
Note! If your product is class II double insulated (only 2 wires
in the cord set), no connection is to be made to the earth
terminal.
Follow the fitting instructions supplied with good quality plugs.
Any replacement fuse must be of the same rating as the
original fuse supplied with the product.
Warning! The above section on mains plug replacement is for
authorized service centre persons.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your BLACK+DECKER product
needs replacement, or if it is of no further use to you, do not
dispose of it with other household waste. Make this product
available for separate collection.
• BLACK+DECKER provides a facility for recycling
BLACK+DECKER products once they have reached the
end of their working life. This service is provided free of
charge. To take advantage of this service please return
your product to any authorised repair agent who will
collect them on our behalf.
• You can check the location of your nearest authorised
repair agent by contacting your local BLACK+DECKER
office at the address indicated in this manual.
Alternatively, a list of authorized BLACK+DECKER repair
agents and full details of our after-sales service and
contact are available on the Internet at:
www.2helpU.com.