Black+Decker FX775, Original Instructions Manual

Page: 5 / 20

• Place the bowl cover (5) onto the bowl (3), turn
clockwise until the cover interlocks on thebowl.
• Place the pusher (6) into feeding chute located on the
bowl cover
Note: Always keep the chopper inside the bowl before
feeding food.
Use the 'pulse' function several times to avoid cutting too
fine. Do not run for too long while cutting hard cheese or
chocolate, otherwise these materials will overheat and begin
to melt.
Standard chopping period: 30 - 60 sec.
Emulsifying disc assembly
• Position the driver (2) on the motor base (1).
• Position the processing bowl (3) into the driver (2) and
turn clockwise to seat firmly on the motor base (1).
• Place the blade adaptor (4) onto the driver (2).
• Place emulsifying disc (13) onto the blade adaptor (4).
• Place the cover (5) on bowl (3), turn clockwise until the
cover locks onto the bowl.
• Place the pusher (6) into the feeding chute.
Note: Emulsifying disc can be used to mix cheese and egg,
to make mayonnaise and pudding rapidly.
Warning! Do not use emulsifying disc to knead flour.
Slicing and shredding blade assembly
• Position the driver (2) on the motor base (1).
• Position processing bowl (3) into the driver (2) and turn
clockwise to seat firmly on the motor base (1).
• Install desired blade onto the disc holder (8), (9) or (10).
• Place the blade holder (7) onto the driver (4).
5
ENGLISH (Original instructions)
• Place the cover (5) on the bowl (3).
• Turn the cover (5) clockwise until cover interlocks on
the bowl.
• Put food into the feeding chute.
• Use the pusher (6) to push the food down for processing.
Note: Choose the desired blade according to the processed
food and desired shape of food.
Push softly when feeding food.
Pre-cut the food into smaller pieces according to the diameter
of the feeding tube.
Feed gradually for better effect.
When cutting soft food, choose a lower speed to avoid the
food liquifying.
If large quantities of food need to be cut, please cut it for
several batches.
1200ml for one batch.
Citrus juicer assembly
• Position the driver (2) on the motor base (1).
• Position the processing bowl (3) into the driver and turn
clockwise to seat firmly on the motor base (1).
• Place the citrus juicing head (15) into the citrus juicing
plate (14) and place onto the bowl (3) and turn 30
degrees clockwise.
Note: Lower speed should be chosen when using the citrus
juicer.
Kneading blade assembly
• Position driver (2) on motor base (1).
• Position processing bowl (3) into the driver (2) and turn
clockwise to seat firmly on motor base (1).
• Place blade adaptor (4) onto the driver (2).
• Place kneading blade (12) onto the blade adaptor (4).
• Place the cover (5) onto the bowl (3), turn clockwise until
the cover interlocks on the bowl.
• Place pusher (6) into feeding chute.
Note: Always attach kneading blade in the bowl before
feeding in food.
Standard kneading period: 20 sec.
Processed Food Measurement per batch
Chocolate ≤100g
Cheese ≤200g
meat ≤500g
T ea or Spice 50 ~ 100g
Fruit & Vegetable 1000 ~ 300g
Onion ≤500g
Processed Food Measurement per
batch
Time per
batch
Egg 2 ~ 5pcs 30 ~ 70sec
Cheese 125 ~ 350ml 20sec
Processed Food Measurement per batch
Flour / Soft
Cheese
≤300g
Egg ≤5pcs