Black+Decker FX1073-B5, Original Instructions Manual

Page: 7 / 24

7
ENGLISH
(Original instructions)
Grinder
1. Put the food into the grinder cup.
2. Place the transparent cover onto the grinder cup and
lock it.
3. Place the grinder on the main body of the food
processor
4. Make sure it is locked by turning it to the lock direction.
5. Set the speed to your desire to start the device.
Note: Dry grinds such as black pepper, coffee beans, etc.
are ground at a rate of not more than the MAX marking (on
the grinder cup) at a time.
Cleaning and maintenance
Warning! Before performing any maintenance:
• Switch off and disconnect from the mains supply.
• Wait for the appliance to completely cool down.
• If necessary scrape excess food particles from the tools.
Warning! The motor base must not be immersed in water or
other liquid.
• Wipe over the outside surface of the base with a damp
cloth and polish with a soft dry cloth.
• Wipe any excess food particles from the power cord.
• Immerse the processing bowl, bowl cover, pusher, blade
holder, cutting blades, chopper, kneading blade,
emulsifying disc, citrus juicing head and plate and
blender assembly in warm soapy water for complete
cleaning. Then rinse under running water and wipe dry.
Dishwasher Safe
All removable parts are dishwasher safe excluding food
processing bowl, blender jar and grinder mill.
Quick-cleaning the food processor bowl and
blender jar
1. Pour lukewarm water (not more than 0.5 litres) and
some washing-up liquid into the food processor bowl or
blender jar.
2. Place the lid on the food processor bowl or blender jar
and turn it clockwise to fix it.
3. Select the speed setting that corresponds with the
accessory.
4. Let the appliance run until the food processor bowl or
blender jar is clean or for 30 seconds.
5. Detach the blender jar or food processor bowl and rinse
it with clean water.
Storage
You can wind the cord around the bottom of the appliance.
Troubleshooting
Mains plug replacement
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the new
plug.
• Connect the blue lead to the neutral terminal.
• If the product is class I (earthed), connect the
green/yellow lead to the earth terminal
Note! If your product is class II double insulated (only 2 wires
in the cord set), no connection is to be made to the earth
terminal.
Follow the fitting instructions supplied with good quality plugs.
Any replacement fuse must be of the same rating as the
original fuse supplied with the product.
Warning! The above section on mains plug replacement is
for authorized service centre persons.
PROBLEM
When I turn the
speed selector to a
speed or to P
(pulse position) the
appliance does not
operate.
The emulsifying
disc or kneading
blade does not
turn,
SOLUTION
Make sure the food processor bowl
and its lid or the blender jar are
assembled correctly (‘click’). Make
sure that the drive shaft has been
inserted properly if you are using
any accessory with the food
processor bowl. If you use the
blender jar, make sure it is locked
in one of its four locking positions,
Keep the lid fixed to avoid spillage.
if you use the food processor, make
sure that the bowl handle is directly
above the closed lock symbol. The
bowl lid is correctly assembled when
the projection is locked in to the slot
of the bowl handle. If all parts are
assembled correctly, the appliance
starts to operate when you select a
speed with the speed selector or
press the pulse button.
Make sure the emulsidfying disc or
kneading blade is assembled
properly onto the drive shaft. Also
make sure the food processor bowl
and the lid are assembled properly
(‘click’ )