Black+Decker FX1073-B5, Original Instructions Manual

Page: 4 / 24

4
ENGLISH
(Original instructions)
In order to avoid a hazard due to inadvertent resetting of the
thermal cut-out, this appliance must not be supplied through
an external switching device, such as a timer, or connected
to a circuit that is regularly switched on and off by the utility
Using your appliance
• Always take care when using the appliance.
• Misuse could cause injury.
• Do not use the appliance outdoors.
• Do not operate the appliance if your hands are wet. Do
not operate the appliance if you are barefoot.
• Guide the power supply cord neatly so it does not hang
over the edge of a work top and cannot be caught
accidentally or tripped over.
• Be careful if hot liquid is poured into the food processor
or blender as it can be ejected out of the appliance due
to a sudden steaming.
• Keep loose clothing, hair, etc. away from moving parts.
• Never pull the power supply cord to disconnect the plug
from the socket. Keep the power supply cord away from
heat, oil and sharp edges.
• If the power supply cord is damaged during use,
disconnect the appliance from the power supply
immediately. Do not touch the power supply cord before
disconnecting from the power supply.
• Switch off the appliance and disconnect from the supply
before changing accessories or approaching parts that
move in use
• Disconnect the appliance from the power supply when
not in use and before changing accessories, cleaning,
etc.
• Do not immerse the appliance, cord set or plug in water
or any other liquids.
Note : Do not run the appliance for more than 2 minutes ,
and wait for one minute or wait until the unit is cooled to
room temperature before performing next operation cycle.
After use
• Switch off, remove the plug from the socket and let the
appliance cool down before leaving it unattended and
before changing, cleaning or inspecting any parts of the
appliance.
• When not in use, the appliance should be stored in a dry
place. Children should not have access to stored
appliances.
Features
1. Fine slicing disc (FX1075-B5 and FX1074-B5)
2. Medium slicing disc
3. Grating disc (FX1075-B5 and FX1074-B5)
4. Fine shredding disc
5. Coarse shredding disc (FX1075-B5)
6. Disc holder
7. Emulsifying disc
8. Kneading blade
9. Protective cover for chopping blade
10. Chopping blade
(2 blade for FX1075-B5 and 1 blade for FX1074-B5 and
FX1073-B5)
11. Pusher
12. Feeding chute
13. Food processor bowl cover
14. Measuring cup
15. Blender jar cover
16. Blender jar
17. Drive shaft
18. Food processor bowl
19. Safety lock
20. Control knob
21. Grinder (FX1075-B5)
22. Motor unit
Before first use
Thoroughly clean the parts that come into contact with food
before you use the appliance for the first time.
(see chapter ‘Cleaning and maintenance’).
Using the appliance
General
The appliance is equipped with a built-in safety lock that
prevents it from functioning if the blender jar or food
processor bowl and its lid are not assembled properly.
Food processor
1. Put the bowl on the motor unit (22) and turn it clockwise
to fix it
Note : The bowl is assembled correctly when the handle is
directly above the closed lock symbol.
2. Put the drive shaft with the desired accessory in the bowl
(chopping blade, kneading accessory, emulsifying disc or
the disc holder with one of the discs). See the
appropriate section below.
3. When you use the chopping blade or the kneading disc,
put the ingredients to be processed in the bowl.
Note : Do not fill the bowl beyond the MAX indication
4. Put the lid on the bowl. Turn the lid clockwise to fix it
(‘click’)
Note : Make sure the projection on the lid locks into the slot of
the bowl handle