Safety instructions
Warning! Read all Safety, Maintenance, Service' manual
carefully before operating this appliance.
Read all of this
manual carefully before operating this appliance.
Intended use
Your BLACK+DECKER
TM
FSM13E1 steam mop has been
designed for sanitising and cleaning sealed hardwood,
sealed laminate, linoleum, vinyl, ceramic tile, stone and
marble floors. This appliance is intended for indoor
household use only.
Safety of others
• This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved.
• Children shall not play with the appliance. Cleaning and
user maintenance shall not be made by children without
supervision.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
• The plug must be removed from the socket-outlet before
cleaning or maintaining the appliance.
• The liquid or steam must not be directed towards
equipment containing electrical components, such as
the interior of ovens.
• The appliance shall not be left unattended while it is
connected to the supply mains;
• The appliance is not to be used if it has been dropped, if
there are visible signs of damage or if it is leaking;
• Keep the appliance out of reach of children when it is
energized or cooling down.
After use (Fig. E)
• Turn the steam mop 'OFF'. turn the steam operation
button (2) to off and then press the ON/OFF button (1).
• Wait until the steam mop cools down.
• Unplug the steam mop from the electrical wall outlet.
• Empty the water tank.
• remove the cleaning pad (7) and wash it ready for next
use.
• Wrap the power supply cable around the tidy hook (10).
Labels on appliance
The following pictograms along with the date code are
shown on the appliance.
CAUTION
Hot Steam
Features
1. On/off switch
2. Steam operate button
3. Water tank access tab
4. Water tank
5. Steam head connector
6. Steam head
7. Steam head cleaning pad
8. Handle connector button
9. Handle
10. Cable tidy hook
11. Grip
12. Power cable
Assembly
Warning!
Before attempting any of the following
instructions, make sure that the appliance is
switched off and unplugged and the appliance is
cold and does not contain any water.
Attaching the handle (Fig. A)
• Slide the bottom end of the handle (9) into the top end of
the steam mop body until the handle connector button (8)
clicks into place.
Attaching the steam head (Fig. B)
• Connect the steam mop body to the steam head (6) via
the steam head connector (5), ensuring the connection
button (13) clicks into place in the the opening (14) .
Attaching a cleaning pad (Fig. C)
Replacement cleaning pads are available from your
BLACK+DECKER dealer :- (cat no. FSMP20-XJ).
• Place a cleaning pad (7) on the floor with the velcro 'loop'
side facing up.
• Lightly press the steam mop down onto the cleaning pad
(7).
Caution:
Always place your steam mop with the handle (9)
supported in the upright position when stationary and make
sure the steam mop is turned off when not in use.
Removing a cleaning pad
Caution!
Always wear suitable shoes when changing the
cleaning pad on your steam mop. Do not wear slippers or
open toed footwear.
4
ENGLISH
(Original instructions)
Summary of Contents for FSM13E1
