6
ENGLISH
charger indefinitely. The charger automat-
ically reduces power consumption when
charging is complete.
WARNING!
Do not charge the battery
at ambient temperatures below 39°F
(4°C) or above 104°F (40°C).
Charging the battery (DVA325BP,
DA325BPS)
WARNING!
For use only with the sup-
plied charger.
• Before first use, the battery must be
charged for at least 16 hours.
• Place the appliance on the charging base
( 7 ) whenever it is not in use as shown in
Figure C.
• Plug the charger into any standard 240
Volt 50 Hz electrical outlet.
WARNING!
Before charging, be sure to empty
all contents and dry thoroughly if needed to
avoid damage to your appliance.
• Make sure the appliance is switched off.
The battery will not be charged when the
on/off switch ( 1 ) is in the on position.
NOTE
: While charging, the charger may
become warm. This is normal and does not
indicate a problem. The appliance can be left
connected to the charger indefinitely.
NOTE
: Remove the pet head before charging.
WARNING!
Do not charge the battery
at ambient temperatures below 39°F
(4°C) or above 104°F (40°C).
Use
Switching on and off (Fig. D)
• To start, slide the On/Off switch ( 1 ) for-
ward (i.e. “O”= Off, “I” = On) in Figure D.
• To stop, slide the switch back.
• Return the product to the charger imme-
diately after use so that it will be ready
and fully charged for the next use. Ensure
that the product is fully engaged with the
charger plug.
Cleaning and emptying the product
WARNING!
Projectile/Respir
tory Hazard: Never use the vac without its filter.
NOTE
: The filter is re-usable, do not confuse it
with a disposable dust bag, and do not throw
it away when the product is emptied. We rec-
ommend that you replace the filter every 6–9
months depending on frequency of use.
There are two methods of cleaning the bowl,
a quick empty method and a thorough clean
method.
For a quick empty (Fig. E, F)
• Press the dust bowl release button ( 2 )
on the handle and remove the dust bowl in
Figure E.
• The top of the bowl is open when the
bowl is removed so that dust can be easy
dumped without touching the filter.
• Empty the dust from the bowl ( 3 ) in
Figure F.
• To replace dust bowl, place it back onto the
handle until it “clicks” firmly into position.
For a more thorough cleaning, remove bowl as
described in Figure F.
For a more thorough cleaning (Fig. G, H)
• Press the dust bowl release button ( 2 )
on the handle and remove the dust bowl in
Figure G.
• Remove filter from within the bowl.
• For a more thorough cleaning (Fig. G, H)
• Press the dust bowl release button ( 2 )
on the handle and remove the dust bowl in
Figure G.
• Remove filter from within the bowl.
• Shake or lightly brush any loose dust off
filter.
• The dust bowl ( 3 ) and filter can be
washed in warm soapy water. Allow to dry
before placing back into the vac.
• Place filter back into the bowl pressing
firmly to ensure a secure fit.
• To replace dust bowl, place it back onto
