7
ENGLISH
the handle until it “clicks” firmly into po-
sition.
IMPORTANT
: Maximum dust collection will
only be obtained with a clean filter and an
empty dust bowl. If dust begins to fall back out
of the product after it is switched off, this in-
dicates that the bowl is full and requires emp-
tying.
• Wash the filters regularly using warm,
soapy water and ensure that it is complete-
ly dry before using again. The cleaner the
filter is, the better the product will perform.
• It is very important that the filter is cor-
rectly in position before use.
Nozzle / Accessories (Fig. I–K)
• A crevice tool ( 4 ) is built into the nozzle
and can be extended as shown in Figure I
by pulling the extension piece until it locks
into position in Figure I.
Attaching Pet Head (Fig. J)
CAUTION:
The unit needs to be switched off
when the pet head is attached or detached.
NOTE
: Do not use directly on pets.
Slide the dust bowl opening ( 3 ) into the open-
ing of the motorized pet head ( 8 ), ensuring
that the connectors ( 12 ) engage with the
recesses ( 13 ). An audible click will be heard.
Removing Pet Head (Fig. K)
CAUTION:
The unit needs to be switched off
when the pet head is attached or detached.
• Pull the motorized pet head release tabs
( 12 ) outward.
• Pull the main unit from the pet head ( 8 ).
Scented filter
• BEFORE FIRST USE - remove bag from
the scented pre-filter. Reassemble per
instructions above.
• When the vacuum is turned on, the plastic
scented filter will emit an aroma to freshen
the air.
WARNING:
– Causes mild skin irritation
– Toxic to aquatic life
– Harmful to aquatic life with long lasting ef-
fects.
– Dispose of contents/ containers to an
approved waste disposal plant.
NOTE
:
When the plastic scented filter no lon-
ger lets off the aroma, it can be an indication
that the filter needs to be replaced. See below
for information on replacement filters.
Replacing the filters
The filters should be replaced every 6 to 9
months and whenever worn or damaged.
Replacement filters are available from your
BLACK+DECKER dealer
(cat. noVPF30)
.
• Remove the old filters as described above.
• Fit the new filters as described above.
Maintenance
Your BLACK+DECKER cordless appliance has
been designed to operate over a long period of
time with a minimum of maintenance.
Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
WARNING!
Before performing any
maintenance on cordless appliances:
• Run the battery down completely if it is
integral and then switch off.
• Unplug the charger before cleaning it. Your
charger does not require any maintenance
apart from regular cleaning.
• Regularly clean the ventilation slots in your
appliance/charger using a soft brush or
dry cloth.
• Regularly clean the motor housing using
a damp cloth. Do not use any abrasive or
solvent-based cleaner.
Protecting the environment
