5
ENGLISH
When using any tool for prolonged periods
ensure you take regular breaks.
• Impairment of hearing.Health hazards
caused by breathing dust developed when
using your tool (example:- working with
wood, especially oak, beech and MDF.)
Chargers
Your charger has been designed for a specific
voltage. Always check that the mains voltage
corresponds to the voltage on the rating plate.
Warning! Never attempt to replace the charger
unit with a regular mains plug.
• Use your BLACK+DECKER charger only
to charge the battery in the appliance with
which it was supplied.
• Other batteries could burst, causing per-
sonal injury and damage.
• Never attempt to charge non-rechargeable
batteries.
• If the supply cord is damaged, it must
be replaced by the manufacturer or an
authorised BLACK+DECKER Service Centre
in order to avoid a hazard.
• Do not expose the charger to water.
• Do not open the charger.
• Do not probe the charger.The appliance/
battery must be placed in a well ventilated
area when charging.
Electrical safety
Symbols on the charger
Read all of this manual carefully
before using the appliance.
#
This tool is double insulat-
ed; therefore no earth wire is
required. Always check that the
power supply corresponds to the
voltage on the rating plate.
$
The charger is intended for
indoor use only.
Labels on appliance
The following symbols appear on this appli-
ance along with the date code.
Read all of this manual carefully
before using the appliance
S003AQ-15
Only use with charger
S003AQ-15
Features
This tool includes some or all of the following
features.
1. On/off switch
2. Dust bowl release button
3. Dust bowl
4. Extendable crevice tool
5. Filter
6. Charging terminals
7. Base charger
8. Pet head
9. Charger
10. Jack plug
11. Charging socket
Assembly
WARNING!
Do not attempt to modify
or repair the appliance
Charging the battery (DVA325JP)
WARNING!
For use only with the
supplied charger.
From new, the rechargeable cells of the prod-
uct need a minimum charge time of 16 hours
to ensure full power.
• The switch must be in the off (“O”) posi-
tion, the product will not charge if it is in
any other position.
• Figure B - Plug the jack plug ( 10 ) of the
charger into the charging socket ( 11 ) of
the tool. Plug the charger into any stan-
dard 240 Volt 50 Hz electrical outlet.
• While charging, the charger may get warm,
this is perfectly normal and safe. It is safe
to leave the appliance connected to the
