Black+Decker BDB600, Manual

Page: 5 / 16

5
ENGLISH
Replacing Carbon Brushes (fig. D)
• Use a screwdriver to remove the brush holder cap.
• Take out the worn carbon brush, insert the new one and
secure the brush hold cap.
Warning! Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark.
Accessories
Mounting The Nozzle And Dust For DustCollection
(fig. B)
• For dust collection, mount the Dust Bag at the Blast Port
(2) and Nozzle at the Suction Port (6)
• To remove Dust Bag and Nozzle, simply pull out by first
turning in the opposite direction.
• Empty the Dust Bag frequently to ensure maximum dust
collecting efficiency.
Operating The Blower (fig. C)
• To switch your Blower on, depress the Switch (3). To stop
your Blower, release Switch.
• Adjust Variable Speed Knob (4) for different speed
requirement.
• When continuous operation is required, first depress the
switch and then the lock-on button (5) and release to
disengage lock, squeeze and release switch.
Warning: Continuous running of machine should not exceed
30 minutes.
Protecting the environment
Separate collection. This product must not
bedisposed of with normal household waste.
Should you find one day that your Black + Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packagin-
gallows materials to be recycled and used
again.Re-use of recycled materials helps preventenvi-
ronmental pollution and reduces the demand forraw
materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Assembly
Warning! Before assembly, make sure that the tool is
switched off and unplug.
Use
Mounting The Nozzle For Blowing Operations (fig. A)
• Insert the pin located inside the Nozzle into the notch
provided on the Blast Port (1)
• To lock Nozzle in place, turn the Nozzle in the direction
indicated.
• To remove Nozzle, turn the Nozzle in the opposite
direction.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance, switch off and
unplug the tool.
• Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
Features
This tool includes the following features:
1. Nozzle
2. Blast Port
3. Trigger Switch
4. Variable Speed Knob
5. Lock-On Button
6. Suction Port
7. Dust Bag
The performance of your tool depends on the accessory used.
Black + Decker and Piranha accessories are engineered to high
quality standards and designed to enhance the performance of
your tool. By using these accessories you will get the very best
from your tool.