Page 17
SET UP & USE
REMOTE CONTROL
TIMER
SPEED
ONE
TOUCH
SLEEP
ENERGY
SAVER
MODE
Power Button
Mode Button
Temp Up +
Speed Button
Sleep Button
Temp Down -
Timer button
Energy Saver
One Touch
POWER BUTTON
Operation starts when this button is
pressed and stops when the button is
pressed again.
NOTE: If the unit has ENERGY SAVER
function, it will initiate automatically
the Energy Saver function under
Cool, Dry, and Auto (only Auto-
Cooling and Auto-Fan) modes.
MODE BUTTON
Press this button to select the desired
operation mode.
TEMP DOWN BUTTON
Push this button to decrease the indoor
temperature setting.
TEMP UP BUTTON
Push this button to increase the
temperature setting.
TIMER BUTTON
Push this button to activate the auto Start
or auto Stop program.
SPEED BUTTON
Used to select the desired fan speed.
ONE TOUCH BUTTON
By pushing this button, the system will
automatically shift to COOL operation
with auto fan speed. Its setting is 80˚F/26˚C.
Any timer programs will be canceled.
SLEEP BUTTON
Press this button to activate the Sleep
mode. This function is available on COOL,
HEAT or AUTO mode only and maintain
the most comfortable temperature for you
and save energy. For the detail, see sleep
operation
.
ENERGY SAVER BUTTON
Press this button to activate the
Energy Saving mode. Press button
again to stop the function.
LOCATION OF THE REMOTE CONTROLLER:
Use the remote controller within a distance of 16 feet from the appliance, pointing it
CAUTION:
• The air conditioner will not operate if curtains, doors or other materials block the signals from the
remote controller to the unit.
• Prevent any liquid from falling into the remote controller. Do not expose the remote controller to
direct sunlight or heat.
• If the infrared signal receiver on the indoor unit is exposed to direct sunlight, the air conditioner may
not function properly. Use curtains to prevent the sunlight from falling on the receiver.
• If other electrical appliances react to the remote controller, either move these appliances or consult
your local dealer.
