ooden Windows
OUTSIDE
H:About 3/4 to 1 for 5 to 8K);
3
H:About 1 to 1 /
for 10 to12K);
8
H
inyl-Clad Windows
OUTSIDE
H:About 3/4 to 1 for 5 to 8K);
Measure from the cabinet edge
3
H:About 1 to 1 /
for 10 to12K);
8
H
window
frame
ooden Windows
OUTSIDE
H:About 3/4 to 1 for 5 to 8K);
3
H:About 1 to 1 /
for 10 to12K);
8
H
inyl-Clad Windows
OUTSIDE
H:About 3/4 to 1 for 5 to 8K);
Measure from the cabinet edge
3
H:About 1 to 1 /
for 10 to12K);
8
H
window
frame
Page 12
SECURE THE ACCORDION
PANELS
NOTE:
Check that air conditioner is tilted
back about H (Fig. 5A and Fig. 5B)
(tilted about 3O to 4O downward
to the outside). After proper
installation, condensate should not
during normal use, correct the slope
otherwise.
B. Extend the side panels out against the
window frame (Fig. 6).
INSTALL SUPPORT BRACKET
A. Place the frame lock between the
frame extensions and the window sill as
shown (Fig. 7A for Wooden windows),
(Fig. 7B for Vinyl-Clad windows) .
DRIVE LOCKING SCREWS
FOR WOODEN WINDOWS:
Drive 1/ 2 (12.7 mm) locking screws
through the frame lock and into the sill
(Fig. 8A).
NOTE:
To prevent window sill from
splitting, drill 1/8 (3mm) pilot holes
before driving screws. Drive 1/ 2
(12.7mm) locking screws through
frame holes into window sash (Fig.
8B).
FOR VINYL-CLAD WINDOWS:
Drive 1/ 2 (12.7 mm) locking screws
through the frame lock and into the
window sash (Fig.8B).
NOTE:
Before driving the screws, use a drill
to drill 5 holes through the holes in
the frame lock and frame extensions
into the windows sash as shown
(Fig. 8B).
C. To secure lower sash in place, attach
right angle sash lock with 3/4” (19mm)
or 1/2” (12.7mm) screw as shown
(Fig.9).
D. Cut Window sash seal foam and insert
it in the space between the upper and
lower sashes (Fig.10).
SET UP & USE
Top right
Wooden Windows
INSIDE
OUTSIDE
H:About 3
r 5 to 8K);
H:Abou t 1 t
r 10 to12K);
H
Vinyl-Clad Windows
INSIDE
OUTSIDE
H:About 3/4 to 1 for 5 to 8K);
H: About 1”-1 3/8” (For 10k)
Measure from the cabinet edge
H
window
frame
Fig. 5B
Top right
Wooden Windows
INSIDE
OUTSIDE
H
Vinyl-Clad Windows
INSIDE
OUTSIDE
H:About 3/4 to 1 for 5 to 8K);
Measure from the cabinet edge
3
H:About 1 to 1 /
for 10 to12K);
8
H
window
frame
Fig. 5A
Fig. 9
Fig. 10
Fig. 8A
Fig. 8B
Fig. 7A
Fig. 7B
Top right
Wooden Windows
INSIDE
OUTSIDE
H:About 3/4 to 1 for 5 to 8K);
3
H:About 1 to 1 /
for 10 to12K);
8
H
Vinyl-Clad Windows
INSIDE
OUTSIDE
H:About 3/4 to 1 for 5 to 8K);
Measure from the cabinet edge
3
H:About 1 to 1 /
for 10 to12K);
8
H
window
frame
Fig. 6
H:About 3/4 to 1 for 5 to 8K);
H: About 1”-1 3/8” (For 10k)
H:About 3/4 to 1 for 5 to 8K);
3
H:About 1 to 1 / for 10 to12K);
8
Using 2 people, keep a firm grip on
the air conditioner, carefully place the
unit into the window opening so the
bottom of the air conditioner frame
is against the window sill (Fig. 5A and
Fig. 5B). Carefully close the window
behind the top rail of the unit.
