Page 23
724-746-5500 | blackbox.com
Chapter 3: Installation
3. Connect the copper cables to Unit B (TE161A-R2, TE163A-R2, or TE165A-R2) as
described:
• Connect the RJ-11C connector at one end of the cable to the RJ-11C port on
Unit B.
• Connect the RJ-11C connector at the other end of the cable to the RJ-11C port
on the telephone device.
Connect to the
RJ-11C port on the
telephone device
Figure 3-7. Connect to the RJ-11C port on the telephone device.
3.4 Installing the Cable—Automatic Ring-Down Configuration
NOTE: Both Unit Bs MUST be configured for Automatic Ring-Down.
3.4.1 Fiber
1. Use fiber cable with male, two-stranded TX to RX connectors installed at both
ends.
2. Connect the fiber cables to the first Unit B (TE161A-R2, TE163A-R2, or
TE165A-R2) as described:
• Connect the male TX cable connector to the female TX port.
• Connect the male RX cable connector to the female RX port.
Figure 3-8. Connecting the fiber cable.
