Page 22
724-746-5500 | blackbox.com
Chapter 3: Installation
• Connect the male TX cable connector to the female TX port.
• Connect the male RX cable connector to the female RX port.
Figure 3-5. Connecting the fiber cable to Unit A (TE160A-R2, TE162A-R2, or
TE164A-R2) and Unit B (TE161A-R2, TE163A-R2, or TE165A-R2).
3. Connect the fiber cables to Unit B (TE161A-R2, TE163A-R2, or TE165A-R2) as
described:
• Connect the male TX cable connector to the female RX port.
• Connect the male RX cable connector to the female TX port.
3.3.2 Copper
1. Use copper cables with male RJ-11C connectors installed at both ends.
2. Connect the copper cables to Unit A (TE160A-R2, TE162A-R2, or TE164A-R2)
as described:
• Connect the RJ-11C connector at one end of the cable to the RJ-11C port on
Unit A.
• Connect the RJ-11C connector at the other end of the cable to the RJ-11C port
on the Central Office.
Connect to the RJ-11C port
on the Central Office
POTS 2-WIre to Fiber Converter
Figure 3-6. Connect to the RJ-11C port on the
Central Office POTS 2-Wire to FIber Converter.
