SERVTRAY
6
2. Introduction
2.1 Overview
Control your rack-cabinet-mounted PS/2
®
server with the compact, easy-to-use ServTray. It consists of a
keyboard, mouse, LCD panel, and KVM module housed in an industry-standard 19" 1U-height rack drawer
(see Figure 2-1).
Two models are available: the ServTray with a 15" LCD panel (KVT201A) and the ServTray with a 17" LCD
panel (KVT202A). Both models feature a full 105-key, low-profile, sturdy keyboard and touch pad with an
ergonomically designed hand rest. The KVT201A has a maximum resolution of 1024 x 768, and the KVT202A
has a maximum resolution of 1280 x 1024.
Install the ServTray in rack cabinets that are 20"D to 39.5"D (50.8 to 100.3 cm). Before installing the ServTray,
you’ll need a Rear Bracket Extension Kit (described in
Section 2.2
).
A KVM module is included with the ServTray. To control more than one PS/2 server, connect the ServTray to a
ServSwitch™.
The KVM module comes with a universal Centronics 36-pin connector; use it to connect the module to the
console drawer. On the opposite side of the KVM module are two 6-pin mini-DIN connectors and one HD15
connector to connect directly to a PS/2 computer or to a ServSwitch’s console ports. Finally, the module has a
barrel connector for power.
Figure 2-1. ServTray components (left to right): Rear Bracket Extension Kit,
KVM Module with power supply, and 1U slide drawer.
2.2 What’s Included
• ServTray 15" or 17" LCD console (LCD panel, keyboard, and mouse pad console drawer)
• KVM module with power supply
• This users’ manual
1U slide drawer with
keyboard, touch pad, and
15" or 17" LCD monitor
KVM
module
Power supply
Rear Bracket Extension Kit
(RMB1, RMB2, RMB3,
RMB4, or RMB5)
