wel
c
ome
c
ontent
s
inst
all
ation
&
op
era
tion
sp
ecial
c
onfigura
tion
fur
t
er
informa
tion
6
®
Connections at the ServSwitch CX Remote (PS/2) module
1 Place the CX Remote module adjacent to the remote user location.
2 Attach the video monitor, keyboard and mouse connectors to the sockets of
the CX Remote module.
3 Attach the connector of the cable run leading from the SAM to the
TO LOCAL
socket of the CX Remote module.
724
-74
6-5
500
®
From mouse
From keyboard
From video monitor
CX Remote
module
4 Insert the output connector of the power supply into the socket at the front
edge of the CX Remote module labelled
POWER
.
5 Insert the IEC connector of the supplied power lead into the corresponding
socket of the power supply. Connect the other end of the power lead to a
nearby mains socket.
6 Where necessary, use the in-built video compensation feature to eliminate
any effects caused by the cable run. See
Video.compensation
for details.
®
550
0
From
power
adapter
Category , e or 6
cable leading to the
SAM module
CX Remote
module
