Black Box ServSwitch ACU5200A, User Manual

Page: 22 / 30

SERVSWITCH WIRELESS KVM EXTENDER INSTALLER/USER GUIDE
18
Figure 4-1. Transmitter LEDs
4.4 Fine-Tuning the Image Settings
Once the radio link has been established, and the monitor attached to the receiver is
displaying computer generated video, some fine-tuning of the video settings may be
desired. This fine-tuning should only be necessary the first time that a ServSwitch
Wireless transmitter is used with a particular computer; settings, once adjusted, are saved
in the transmitter unit.
A mouse or keyboard driven menu, called the On-Screen Display (OSD), enables you to
perform these adjustments. The ServSwitch extender OSD allows you to use an Auto
Setup feature to adjust the image settings, or enables you to manually adjust any of the
individual image settings. New settings may be temporarily or permanently saved.
Main menu options
The ServSwitch Wireless KVM Extender Main menu has two options- Auto Setup and
Link Status. The Auto Setup checks the video parameters for your source computer and
then automatically optimizes the video quality portrayed on your monitors. The Link
Status indicates the signal strength of the wireless connection between your ServSwitch
Wireless transmitter and receiver.
Advanced menu options
The ServSwitch Wireless KVM Extender OSD Advanced menu allows you to fine-tune
the video settings that were established with the Auto Setup function. You may tune the
horizontal and vertical position of the video monitor window, as well as adjust the
brightness and contrast of the video image. You may also adjust the video clock phase in
the ServSwitch Wireless transmitter relative to the video clock at your source computer to
assure the cleanest, sharpest video image.
4.5 Image Adjustment Using the ServSwitch Wireless
KVM Extender OSD
When configuring the OSD, you may use the Auto Setup function to automatically
optimize the video of your ServSwitch Wireless KVM Extender, or you may choose to
LED Conditions
S1 S2 PWR Condition
OFF OFF ON No Activity, Power is On
OFF OFF OFF No Activity, Power is Off
OFF ON ON Establish Link
ON ON ON Connected