Black Box ServSwitch ACU5200A, User Manual

Page: 14 / 30

SERVSWITCH WIRELESS KVM EXTENDER INSTALLER/USER GUIDE
11
2.2 Compatibility with Peripherals
The ServSwitch Wireless KVM Extender is compatible with the following
peripherals:
• Keyboard- The
ServSwitch
Wireless transmitter and receiver support virtu-
ally any standard PS/2 keyboard.
• Mouse- The
ServSwitch
Wireless transmitter and receiver support 2-button
PS/2 mice. Mice that have more than two buttons work with the reduced
functionality of a 2-button mouse.
• Video- The ServSwitch Wireless KVM Extender supports VGA, SVGA and
XGA resolutions up to 60 Hz refresh rate. Both CRT and LCD monitors with
standard 15-pin high density connectors are supported.
• Audio- Speakers and headphones with 3.5 mm audio plugs are supported on
the receiver side of your ServSwitch Wireless KVM Extender, provided the
transmitter has been connected to the sound card of your PC with the pro-
vided audio cable.
2.3 Safety Precautions
To avoid potential video and/or keyboard problems when using BLACK BOX
products:
• If the building has 3-phase AC power, ensure that the computer and monitor
are on the same phase. For best results, they should be on the same circuit.
• Use only BLACK BOX-supplied cable to connect computers and KVM
switches. BLACK BOX warranties do not apply to damage resulting from
user-supplied cable.
To avoid potentially fatal shock hazard and possible damage to equipment,
please observe the following precautions:
• Do not use a 2-wire extension cord in any BLACK BOX product configura-
tion.
• Test AC outlets at the computer and monitor for proper polarity and ground-
ing.
• Use only with grounded outlets at both the computer and monitor. When
using a backup Uninterruptible Power Supply (UPS), power the computer
and the
ServSwitch
Wireless transmitter unit off the supply.
NOTE: The AC inlet is the main disconnect.